Skip to content

News

IK10 and IP66 on a camera data sheet: what the ratings tell you

IK10 and IP66 appear on many security camera data sheets. This guide explains what each rating tests, what it leaves out, and which questions to ask before you buy a camera for outdoor use.

  • Published on
Abstract pattern of navy and amber shapes on a navy grid: the standard cover of a guide about video surveillance products in the DMO e-catalogue.

This article was written automatically on 19 November 2026 from the information on this site and checked by automated rules; it was not reviewed by a person. Tell us if something is wrong

A camera data sheet often shows two short codes: IP66 and IK10. They look alike, but they answer different questions. This guide explains what each one means, what it does not promise, and what to check before you buy.

Two ratings, two different questions

The IP rating (Ingress Protection) says how well the housing keeps out solid objects and water. The IK rating (impact protection) says how much mechanical impact the housing can take before it is damaged.

Both ratings come from laboratory tests with set methods. A camera does not earn a rating by description. It earns it by passing a test. So the first thing to ask is whether the rating applies to the whole camera as sold, or only to one part.

What IP66 tells you

An IP code has two digits. Each digit answers one question.

  • First digit, solids: it runs from 0 to 6. A 6 means the housing is dust-tight.
  • Second digit, water: it runs from 0 to 9. A 6 means the housing withstands powerful water jets from any direction.

So IP66 means dust cannot get in and heavy rain or a strong jet of water should not either. For a camera on a wall, a pole or a car park, this is a sensible level.

Two points often cause confusion. First, IP66 does not mean the camera can be put under water. Protection against immersion is a different digit, and a camera can be rated for jets without being rated for immersion. Second, a higher second digit is not always "better" in a simple line. Some codes test different things, so read the digit and its description, not only the size of the number.

What IK10 tells you

The IK scale runs from IK00, which means no protection, to IK10, which is the highest level. Each step matches a stated impact energy, measured in joules. IK10 corresponds to an impact of 20 joules, which is a heavy blow to the housing.

This matters where someone can reach the camera: a corridor, a school yard, a stairwell, a car park, a public building. A camera with a high IK rating is harder to put out of action with a hit from a tool or a thrown object.

Keep in mind what the test measures. It checks that the housing survives a defined impact. It does not promise that the camera will keep its aim, or that it cannot be removed, painted over or covered.

What the ratings do not cover

IP66 and IK10 are useful, but they are only part of the picture. They do not tell you about:

  • Temperature range. Look for the stated operating range, and check whether very cold or very hot sites are within it.
  • Corrosion. Salt air, chemicals and industrial sites may need extra protection beyond an IP code.
  • Power and cabling. Water often enters through a poorly sealed cable gland or connector, not through the housing.
  • Mounting. A strong camera on a weak bracket is still a weak installation.
  • Image quality. A tough housing says nothing about how the camera sees at night or against bright light.

Questions to ask before you buy

A short list helps you compare models without being lost in the numbers.

  1. Does the rating apply to the complete camera, including the mounting parts and cable entry?
  2. Is the rating stated for the exact model you are buying, or for a product family?
  3. Are there conditions, such as a specific bracket, a sealed connector or a certain installation position?
  4. Can the supplier show the full technical specification, not only a summary?
  5. Is the site exposed to vandalism, heavy weather or both? Choose the rating for the real risk, not the highest number on the page.

If the buyer is a public body, it also helps to write the required ratings into the purchase request in plain words. For example, state that the camera must be dust-tight and withstand powerful water jets, and that it must resist a stated level of impact. This keeps offers easy to compare.

Where to find the specifications

Pinet is a supplier of i-PRO products in the Devlet Malzeme Ofisi (DMO) e-catalogue. On the DMO security cameras page, each camera shows its DMO product code and its full technical specification. You can also contact Pinet to choose a camera or to request a quote.

More

More news

All news

How to choose a firewall size for a branch office

A firewall that is too small slows the branch down, and one that is too large wastes budget. This guide explains what to measure and what to ask before you choose.

Have a question about this news?

Write to us. A consultant will answer.